Fill your entire home with personalized mood lighting for any occasion. The INSTEON KeypadLinc is more than an in-wall controller and a 600-watt local dimmer. Rhe user can choose the installed 6-button keypad or changing it to the included 8-button version for a wealth of control options. The KeypadLinc can be used as a central monitoring and controlling device: Install one by your front door and link up to eight individual lights or groups of lights, and you'll be able to see the on/off status of each light by looking at the keypad. Forget to turn off a bedroom light on the way out in the morning? Simply press the corresponding keypad button to turn it off without having to run all the way back to the bedroom.

Each KeypadLinc button can perform up to four different functions, such as on, off, brighten, and dim. To help label the KeypadLinc's buttons, several pages of pre-printed labels are included with every unit. This dimmer switch can control incandescent bulbs, low-voltage halogen (e.g. track), and other low-voltage lights with magnetic or dimmable electronic transformers.

For additional control, install Smarthome Manager Essential's Timer Software on a computer to schedule any KeypadLinc V2 Dimmer or any INSTEON-enabled device to turn on or off at any specific time or even at sunrise and sunset. The KeypadLinc dimmer can control up to a 600-watt load. If a larger load is required, the SwitchLinc V2 Dimmer 1000W is available.

The KeypadLinc V2 Dimmer is easy to install. Just remove the old switch, reattach the line, load, and ground wires with the addition of the neutral wire using the included wire nuts.

All KeypadLinc V2 Dimmer settings are stored in static memory and are not lost during power failures. Additionally, in the event of a power loss, the KeypadLinc Dimmer will return to its last brightness level when power is restored.

Operating Conditions Indoors, 40 to 104°F, up to 85% relative humidity.
Dimensions 4.1" H x 1.8" W x 1.2" D.
Weight 3.6 oz.
Supply Voltage 120 Volts AC +/- 10%, 60 Hertz, single phase.
Surge Protection MOV rated for 150 Volts.
Power Wire Leads 6", 16 AWG, stranded, 600V, 105°C insulation, ends stripped and tinned, LINE (black), LOAD (red), NEUTRAL (white.
) Ground Lead 6", 18 AWG, stranded, bare copper.
Load Types Wired-in incandescent lighting devices.
Maximum Load 600 Watts (uses 12-Amp triac dimmer).
Minimum Load No minimum load required.
Certification Safety tested for use in USA and Canada (ETL #3059287-001).
# KeypadLinc V2 Dimmer.
# Quick-Start Guide.
# 2 mounting screws.
# 3 wire nuts.
# White and ivory trim frames.

0 items
Quick Find
Use keywords to find the product you are looking for.
Advanced Search
Share Product
Share on Facebook Share on Twitter Share on Google Buzz Share on Digg